# CHANGE COLUMN NAME PHOENIX **URL:** \ **Category:** Phoenix WNL basics\ **Created:** [January 25, 2016, 7:55pm UTC](https://forum.certara.com/t/change-column-name-phoenix/2928 "2016-01-25T19:55:15Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![sharmavineet](https://avatars.discourse-cdn.com/v4/letter/s/b487fb/32.png) [@sharmavineet](https://forum.certara.com/u/sharmavineet)\ **Post date:** [January 25, 2016, 7:55pm UTC](https://forum.certara.com/t/change-column-name-phoenix/2928/1 "2016-01-25T19:55:15Z")
![column name.jpg](https://us1.discourse-cdn.com/certara/original/2X/d/d8a51d03bc363568dfa0546828aaff7852c696d0.jpeg) ---
**Author:** ![SimonDavis](https://avatars.discourse-cdn.com/v4/letter/s/d9b06d/32.png) [@SimonDavis](https://forum.certara.com/u/SimonDavis)\ **Post date:** [January 27, 2016, 4:35pm UTC](https://forum.certara.com/t/change-column-name-phoenix/2928/2 "2016-01-27T16:35:35Z")
There are a couple of ways, firstly if you were using something already inthe final parameters tab you could have used the **Parameter Names** in **Setup** tab. In your case the column **AUC** comes from the **Summary Table** which cannot be renamed in this manner, so you’ll have to use the **Column Properties** option in **Data Wizard** (Note you cannot use brackets or spaces in a column name) Lastly you could rename it in a Phoenix table with the **Option \> Column Titles** inthe lower panel of the Table object Simon. ![parameter_names.jpg](https://us1.discourse-cdn.com/certara/original/2X/8/8fd1e3cf23423dd401a7e4f07ca443dac0f2bd87.jpeg) ![col_prop.jpg](https://us1.discourse-cdn.com/certara/original/2X/c/c9cdab2d03f078d15010586644f2b2fa4316358a.jpeg) ---
**Author:** ![sharmavineet](https://avatars.discourse-cdn.com/v4/letter/s/b487fb/32.png) [@sharmavineet](https://forum.certara.com/u/sharmavineet)\ **Post date:** [February 5, 2016, 4:23pm UTC](https://forum.certara.com/t/change-column-name-phoenix/2928/3 "2016-02-05T16:23:36Z")
Thank you Simon: I did not think of the transformation approach.